Our innovation does not finish with drones, we have our custom-fitted vans packed with all the latest cleaning technology to provide smart cleaning

Smart Cleaning 

What is smart cleaning

Drone used for Drone washing Drone Cleaning for Building Cleaning and Window Cleaning safe fast saving money low cost

Before and after using our Drone and Smart clean system in the US

At Drone Clean UK, we have embraced the latest technological advancements in the field of cleaning. Our vans are equipped with state-of-the-art tools to enable efficient and effective cleaning at extreme heights.

Our modern heavy-lift drones utilise new industry advancements to clean buildings and windows without direct contact, eliminating the need for manual scrubbing. This approach also reduces the risk of damage associated with traditional high-pressure washing methods. These new advancements in cleaning methods can tackle the toughest cleaning jobs giving a bright and streakless finish every time.

Drone Clean UK - Smart Clean System

At Drone Clean UK, we pride ourselves on delivering unparalleled cleaning solutions, leveraging a combination of cutting-edge drone and cleaning technologies to tackle even the most challenging cleaning jobs. Our advanced smart wash system integrates the latest innovations, from our softwash solutions to state-of-the-art filtration systems, ensuring a thorough clean that traditional methods simply cannot achieve for windows and facades.

Softwashing is a cleaning process that safely removes organic stains, mildew, and algae from outdoor surfaces using a low-pressure washing technique.

Using our biodegradable and eco-friendly solutions we are able to remove not only the surface dirt and grime but also the roots of the mold, mildew, algae, or moss from deep within the surface of the building, reducing regrowth, giving a longer-lasting clean and saving money.

Smart Cleaning is used at low pressure saving water but also protecting the fabric of buildings and window frames.

Part of our smart cleaning system uses a foam solution to make sure the cleaning solutions stick to the building, this is then left for 30 minutes so it can penetrate deep to the roots of the dirt and growths.

Finally, we rinse off using deionised water to give a sparkling streak-free clean.

Illustration of a water filtration system with three filter cartridges, labeled 'Deionised Water',

Our vans are equipped with the latest technology, through reverse osmosis at an industrial level, we can take normal water and turn it into Deionised water.

Deionized water (Purified) is crucial for cleaning tasks, whether it's sterilizing surgical tools or washing windows. By being devoid of ions and minerals, deionised water actively seeks to absorb contaminants from its surroundings, acting like a magnet attracting dirt and grime. Its purity ensures a streak-free and residue-free finish.

For optimal results, once we have softwashed a building we rinse it with deionized water eliminating any streaks to leave a brilliant finish. This makes our cleaning process thorough and eco-friendly.

Icon of a thermometer with water droplets around it, indicating temperature, and the text 'Hot Water System' below.

We have Hot water systems connected to our softwash and jet wash systems, providing water at up to 70 degrees.

Hot water cleans more effectively and efficiently than cold water because it softens and absorbs dirt much faster and helps loosens grease and any solids like bird soiling from surfaces,

This is why people wash dishes in warm water and why using hot water will significantly reduce your time to remove dirt from windows and facades, speeding up drying time to leave a spot-free finish.

Illustration of a power washing nozzle spraying water, with the text 'Power Wash' below, indicating cleaning or washing service.

We use industrial level drones that can apply a Powerful jet wash at 3500 psi if needed without affecting its flight pattern.

Most cleaning jobs are easily completed using softwash and the use of deionised water, occasionally there is a need to remove contaminants with high pressure, usually areas of moss or heavy staining.

We will always apply jet wash at the lowest pressure needed to remove the problem so avoiding any damage to buildings, often incorporating a cleaning solution and hot water to keep the pressure at a minimum.

  • Absolutely - Soft washing has become one of the most important changes in the exterior cleaning industry over the last few years, it actually cleans better than the old pressure washing method, as it does not damage buildings and also cleans deeper, killing the root of most dirt growths leading to much longer-lasting cleans.

  • Our soft washing solutions are biodegradable and 100% eco-friendly. Even if these solutions contain bleach, when it is diluted with water and rinsed away, it is safe to use. It is the same concentration that you would typically see in swimming pools or when disinfecting drinking water.

  • Our soft washing chemicals can be used on a wide variety of surfaces, including roofs, facades, windows pathways, decking, patios and more. They are designed to be effective on various materials, including wood, brick, stone, vinyl, and metal.

  • Softwash will last 4 to 6 times longer than pressure washing. Results can vary depending on environmental factors and the surface cleaned, but generally, the effects can last anywhere from 3 to 5 years. Regular maintenance can help extend the life of the clean.

  • Our chemicals are specially formulated and are dependent on the type of growth and the method used by us that effectively removes organic growth like algae, lichen, and moss while being safe for your surfaces and the environment.

  • Yes, all employees have attended and completed training on SoftWash Systems and the safe handling of cleaning solutions used.

    We are insured for £ 5 million Commercial Liability Policy for Customer protection and peace of mind.

  • It is not recommended to use a pressure washer as your soft wash system, soft washing is a low-pressure cleaning method. A steam or pressure washer can be used as a pre-clean where algae is wide spread and dense, but only to remove the surface layer and working knowledge to do the work correctly.

  • Yes, in fact it is the best way to clean the stone, render, and brick facings without damaging the surface. Pressure washers can damage the surface of these surfaces. This high-pressure method can often cause delamination on bricks, remove pointing allowing water to ingress, chip delicate stone, or render.

  • Once your building has been soft washed the results are truly amazing and will last 4-6 times longer than pressure washing alone.